By using seetrudirect.com you agree to our use of cookies to enhance your experience.

Please visit the new www.seetru.com

Wednesday April 30, 2025

+44 (0) 117 930 6100info@seetru.com

Home

Same Day Despatch
LGS^® Safety Relief Valves - WRAS & KUKReg 4 approved LGS^® HI-FLOW Safety Relief Valves - WRAS & KUKReg 4 approved Type 818 & 848 - Atmospheric Safety Valves 64610 - Enclosed Discharge Safety Valves Type 526 - Leser Flanged API Valves P3W Pressure and Temperature Relief Valve

Portal

Flows/Pricing

Home / Products / Valves / Compressed Air & Gas / Flanged Valves / 13mm Bore

send us an enqu

13mm Nominal Bore Enclosed Discharge Safety Relief Valve

Datasheet:


Min. Pressure	-	0.32 bar g. (4.64 psi g.)
Max. Pressure	-	49.00 bar g. (710.50 psi g.)
Temperature Range	-	-30 °C to 200 °C (subject to seal material)
Flow Area	-	147.34 mm² (13.7 mm inlet bore diameter)
Inlet Connection(s)	-	DN20/DN25 DIN or 3/4"/1" ANSI Flange
Outlet Connection(s)	-	DN25 DIN or /1" ANSI Flange
Flow Rate	-	27.00 to 1214.00 std. litres/sec.
Materials	-	St. Steel
Seal Materials	-	Viton® Nitrile Neoprene Ethylene Propylene Perfluroelastmer
Test Certification	-	Included - supplied Free of charge
Approvals	-	UKCA - PE(S)R BS EN ISO 4126-1 ASME Section VIII Division 1 Pressure Equipment Directive, PED (CE marked) CRN Canadian Approval EAC customs union (Russia, Belarus and Kazakhstan)

Flows Rates:
Flow calculated based upon: Air @ 15°C and 1013 mbar and are for guidance only, contact Seetru for help in sizing to your specifications.

Product Description:
13mm Nominal Bore Enclosed Discharge Safety Relief Valve for Compressed Air & Gases

Notes:
Maximum permissible built up back pressure is 10% of set pressure
Stable operation on flows down to 50% of valve rated capacity
Relieving pressure is set pressure +10% (0.1 bar g. below 1.40 bar g.)
Reseating pressure is set pressure -10% (0.3 bar g. minimum)
Below 1.40 bar g., PED & EAC approved only, above 1.40 barg PED, EAC, ASME and CRN approved