By using seetrudirect.com you agree to our use of cookies to enhance your experience.
Sunday June 15, 2025
Basket  | +44 (0) 117 930 6100info@seetru.com |
Home
ryType 6G6 Clean Service Enclosed Discharge Safety Relief Valve for Steam |
|||||||||||||||||||||||||||||||||||||||
|
Datasheet:  |
|
|||||||||||||||||||||||||||||||||||||
Flows Rates:
See Datasheet
Product Description:
Enclosed Discharge Safety Relief Valve for Steam - Clean Service. Available with either 10 or 13mm nominal bore.
Materials:
Stainless Steel
Process Contact Surface
In accordance with ASME BPE-2005 Table SF-5.
Surface designation Ra Max 15 µinches, 0.4 µm, Electropolished.
Other Surfaces
Not greater than 60 µinches, 1.5 µm.
Elastomer soft sealing specifically developed for food & pharmaceutical industries, compliant to:
1. FDA 21 CFR 177.2600
2. United States Pharmacopoeia (USP) Class VI
3. SP3A Sanitary Standards for Multiple Use Rubber Dairy Equipment No 18-03.
Notes:
Maximum permissible built up back pressure is 10% of set pressure
Stable operation on flows down to 50% of valve rated capacity
Relieving pressure is generally set pressure +10% (see datasheet for more information)
Reseating pressure is set pressure -10% (0.3 bar g. minimum)
Below 1.55 bar g., PED certified only
Tri-Clamp® compatible generally in accordance with ASME BPE 2005 & BS 4825-3
See Datasheet
Product Description:
Enclosed Discharge Safety Relief Valve for Steam - Clean Service. Available with either 10 or 13mm nominal bore.
Materials:
Stainless Steel
Process Contact Surface
In accordance with ASME BPE-2005 Table SF-5.
Surface designation Ra Max 15 µinches, 0.4 µm, Electropolished.
Other Surfaces
Not greater than 60 µinches, 1.5 µm.
Elastomer soft sealing specifically developed for food & pharmaceutical industries, compliant to:
1. FDA 21 CFR 177.2600
2. United States Pharmacopoeia (USP) Class VI
3. SP3A Sanitary Standards for Multiple Use Rubber Dairy Equipment No 18-03.
Notes:
Maximum permissible built up back pressure is 10% of set pressure
Stable operation on flows down to 50% of valve rated capacity
Relieving pressure is generally set pressure +10% (see datasheet for more information)
Reseating pressure is set pressure -10% (0.3 bar g. minimum)
Below 1.55 bar g., PED certified only
Tri-Clamp® compatible generally in accordance with ASME BPE 2005 & BS 4825-3
|
Copyright © 2024 Seetru Limited. All Rights Reserved.
